Latest Blog Post

Flash your ESP32 based Player with the latest firmware via web browser!

  sle118 , one of the main developers of SqueezeESP32 (aka Squezzelite-ESP32) has concentrated over the past of weeks on reworking the build system, paving the way to a full integration with the esp-web-tools. Which allows flashing a complete set of binaires from the web browser. The current state of the web browser based firmware installer is just from the look and feel still very simplified, but it's up to date with the latest firmware builds and easy to use. This is another important step to make ESP32 WROVER based music players even more accessible to the general public. Minimum requirements: Web Browser: Chromium based like Google Chrome or Microsoft Edge OS: Windows, macOS, ... Driver: Make sure you have the right USB/Serial drivers installed like: CP2102 CH341 Web firmware installer: https://sle118.github.io/squeezelite-esp32-installer/          
0

SUPPORTED HARDWARE & NVS Hardware Configuration

Supported Hardware for SqueezeESP32

Any ESP32-based WROVER (WROVER-B | WROVER-E) board with at least 4MB of flash and 4MB of PSRAM will be capable of running SqueezeESP32. Most DAC will work out-of-the-box with simply an I2S connection, but some require specific commands to be sent using I2C.

See also SqueezeESP32 - Wiki on more information.

ESP32 boards that are already known to work with SqueezeESP32 (aka Squeezelite-ESP32)

 I2S Audio DACs that are already known to work with SqueezeESP32 (aka Squeezelite-ESP32)

 

NVS Editor & Config Backups

Her you can find some NVS backup files, for several Player/Boards which are currently not included to the firmware.

List of available NVS config backups:

  • Makerfabs_MAKT32+MPAUDIO_DAC+OLED-only_V1.1
  • Makerfabs_MAKT32CL+MPAUDIO_DAC+LCD-only_V1.0
  • OLiMEX_ESP32ADF_DAC-only_V1.0
  • OLiMEX_ESP32ADF_DAC+OLED-I2C-SH1106-128x64_V1.0
  • raspiaudio_ESP_Muse_Mn_Cast_hardware-only_V1.0

The backups contain only the proper settings for the hardware. All other settings of a NVS backup are not included. This means that your own settings will be kept and there will be no complications with loading a complete backup, if something changes in the other settings in a new firmware version. 

Via NVS Editor (to activate: Credits > [x] Show NVS Editor)

@ NVS Editor (tab)

To load & activate the NVS backup files:

  1. [ Load files ] (choose the right NVS jason file, which fits to your hardware)
  2. [ Commit ]
  3. [ Reboot ]



Comments

  1. AnonymousDecember 14, 2022 at 1:22 PM

    Thanks!

    ReplyDelete
  2. AnonymousMarch 17, 2023 at 1:19 PM

    Thank you very much for your knowledge. I have the Makt32 board working. But I can't get the audio and track change buttons to work. I can't find the correct configuration for NVS Editor to solve that.

    ReplyDelete

Post a Comment